Please Reboot Computer and Start Mining Again

31. OVERCLOCKING VIA TUNING-Set

You need to save the changes on the form and on the Tuning tab after inbound the data in Prepare. Click Save button for it. Use the Save&Apply button to use the entered changes and restart mining.
Attention! oc -sleep ... and oc ... - these are two dissimilar commands. Each control must be entered from a new line.

Functionality of the overlock oc

Y'all tin apply an overclock out via the Execute field. (Set push button on the Tuning tab):
Example: oc -cclk=1070 -mclk=2050 -cvddc=780 -mvddc=800 -tt=65 -fan=80
The command must always commencement with oc. The oc parameter in Fix must be only i

Available arguments for "oc ...":

-fan= - Fan speed (if the autofan is turned off). Example: -fan=eighty
-fanmin= - the minimum allowed fan value when the autofan is turned on. Example: -fanmin=0
-fanmax= - the maximum allowed fan value when the autofan is turned on. Example: -fanmax=100
-tt= - Target temperature (if autofan is enabled). Example: -tt=65
-wh= - Watchdog past hashrate at the GPU level (h/s). Example: -wh=30000000 (30Mh/s)

AMD simply

-cvddc= - Core voltage in mV (AMD only). Case: -cvddc=800
-mvddc= - Voltage of the memory controller in mV (AMD only). Case: -mvddc=800
-socvddmax= - Maximum SOC voltage in mV (but for Navi10, Navi14). Example: -socvddmax=800
-gfxvddmax= - Maximum GFX voltage in mV (just for Navi10, Navi14). Example: -gfxvddmax=800
-socclkmax= - Maximum SOC frequency in Mhz (but for Navi10, Navi14). Example: -socclkmax=800
-gfxclkmax= - Maximum GFX frequency in Mhz (just for Navi10, Navi14). Example: -gfxclkmax=800
-ttm= - Target memory temperature for GPUs on Vega/Navi chips (if autofan is enabled). If ready different from 0, -tt is ignored! Instance: -ttm=lxxx
-lp=1 - Reduces consumption on AMD RX 6xxx series by xx-30W (merely for Navi21, Navi22)

NVIDIA only

-cclk= - Cadre frequency in Mhz (for Nvidia - frequency offset). Example: -cclk=100
-mclk= - Retention frequency in Mhz (for Nvidia - frequency starting time). Example: -mclk=1000
-pl= - Consumption limit in watts (only for Nvidia). Example: -pl=100
-fixclk= - Sets a stock-still core frequency on the 20th, 30th Nvidia series (Experimental choice! In some cases, information technology may assist reduce consumption). Example: -fixclk=800
-fixpstate=one - Disable the switching of CUDA and OpenCL drivers to the PState2 mode. Coordinating to the option CudaForceP2State=off on Windows in Nvidia Inspector app. !!ATTENTION!! Global setting, applied to ALL maps (Experimental choice! Enables the ability to set higher retention frequencies)
-led= - controls the logo illumination on some Nvidia cards. Default: 0. Valid range is 0-100. Case: -led=0 (off)

Delayed overclock oc -slumber

In order to utilise this function, you must specify in Set: oc -sleep=X …
where X is the quantity of seconds after starting the miner after which the parameters will be practical
The command should always start with oc -slumber=X. The oc -sleep=X parameter in Fix must exist only 1
Example: oc -sleep=100 -cclk=1070 -mclk=2050 -cvddc=780 -mvddc=800

Available arguments for "oc-sleep ..."

-slumber= - The number of seconds later on starting the miner, after which you need to utilise the overclock.
Example: -sleep=120

AMD only

-cvddc= - Cadre voltage in mV (AMD merely). Case: -cvddc=800
-mvddc= - Voltage of the retentiveness controller in mV (AMD just). Example: -mvddc=800
-socvddmax= - Maximum SOC voltage in mV (only for Navi10, Navi14). Instance: -socvddmax=800
-gfxvddmax= - Maximum GFX voltage in mV (but for Navi10, Navi14). Example: -gfxvddmax=800
-socclkmax= - Maximum SOC frequency in Mhz (simply for Navi10, Navi14). Example: -socclkmax=800
-gfxclkmax= - Maximum GFX frequency in Mhz (only for Navi10, Navi14). Example: -gfxclkmax=800

NVIDIA simply

-cclk= - Core frequency in Mhz (for Nvidia - frequency offset). Instance: -cclk=100
-mclk= - Retention frequency in Mhz (for Nvidia - frequency start). Example: -mclk=1000
-pl= - Consumption limit in watts (only for Nvidia). Instance: -pl=100

giddensevic1955.blogspot.com

Source: https://raveos.com/help.html

Share this post